Scientific papers and Published Articles-The Madison Group

Publications

Plastic Selection for Wear and Friction Applications

Friction and wear are two significant factors affecting the lifespan and performance of plastic components…

Jack DeSousa, B.SJune 15, 2026

Publications

Using Simulation To Anticipate, Correct Core Deflection in Injection Molding

Industry trends have pushed toward the miniaturization of devices and assemblies. One important consideration with…

Erik Foltz, M.S.May 7, 2026

Publications

Polymer Selection: Identifying the Ideal Material for an Outdoor Application

The adoption of plastic materials for outdoor applications has been an evolving process. During the…

Javier Cruz, Ph.D.April 9, 2026

Publications

Bringing Order to the Chaotic Debate of Turbulent Flow in Injection Molding

Attention to cooling line optimization of injection molds has increased in recent years. With the…

Erik Foltz, M.S.March 13, 2026

Publications

Metal-to-Plastic Replacement: Identifying the Ideal Polymer Candidate

Since the earliest applications of synthetic polymers, plastics have steadily replaced traditional materials across a…

Paul Gramann, PhD, PEFebruary 16, 2026

Publications

Polymer Showdown — POM vs. POK — May the Best Material Win!

Unlike the materials we have compared in the prior installments in the series, polyacetal (POM)…

Jeffrey A. JansenSeptember 9, 2025

Publications

When Injection Molding Simulation Can Be a Great Troubleshooting Tool

As plastic product designs become more intricate and customer demands continue to rise, the challenges…

Erik Foltz, M.S.July 23, 2025

Publications

Polymer Showdown — PPO vs. PA66

In the realm of high-performance polymers, poly(phenylene oxide) (PPO) and polyamide 6/6 (PA66) stand out…

Richie Anfinsen, B.S.June 18, 2025

Publications

Polymer Showdown — PC/ABS vs. PC/PBT

Welcome to the ultimate showdown in the world of polymers. In one corner, we have…

Richie Anfinsen, B.S.April 22, 2025

Publications

Get the Most From Fiber-Reinforced Thermoplastic Composites Parts

A staple responsibility for designers at any company is to investigate ways of manufacturing their…

Erik Foltz, M.S.February 21, 2025

Publications

Plastic Selection for Wear and Friction Applications

Using Simulation To Anticipate, Correct Core Deflection in Injection Molding

Polymer Selection: Identifying the Ideal Material for an Outdoor Application

Bringing Order to the Chaotic Debate of Turbulent Flow in Injection Molding

Metal-to-Plastic Replacement: Identifying the Ideal Polymer Candidate

Polymer Showdown — POM vs. POK — May the Best Material Win!

When Injection Molding Simulation Can Be a Great Troubleshooting Tool

Polymer Showdown — PPO vs. PA66

Polymer Showdown — PC/ABS vs. PC/PBT

Get the Most From Fiber-Reinforced Thermoplastic Composites Parts

Knowledge-Base Categories

Recent Articles

Subscribe to our Newsletter

Headquarters

Resources

Knowledge-Base

Legal