Scientific papers and Published Articles-The Madison Group

Publications

Bringing Order to the Chaotic Debate of Turbulent Flow in Injection Molding

Attention to cooling line optimization of injection molds has increased in recent years. With the…

Erik Foltz, M.S.March 13, 2026

Publications

Metal-to-Plastic Replacement: Identifying the Ideal Polymer Candidate

Since the earliest applications of synthetic polymers, plastics have steadily replaced traditional materials across a…

Paul Gramann, PhD, PEFebruary 16, 2026

Publications

Polymer Showdown — POM vs. POK — May the Best Material Win!

Unlike the materials we have compared in the prior installments in the series, polyacetal (POM)…

Jeffrey A. JansenSeptember 9, 2025

Publications

When Injection Molding Simulation Can Be a Great Troubleshooting Tool

As plastic product designs become more intricate and customer demands continue to rise, the challenges…

Erik Foltz, M.S.July 23, 2025

Publications

Polymer Showdown — PPO vs. PA66

In the realm of high-performance polymers, poly(phenylene oxide) (PPO) and polyamide 6/6 (PA66) stand out…

Richie Anfinsen, B.S.June 18, 2025

Publications

Polymer Showdown — PC/ABS vs. PC/PBT

Welcome to the ultimate showdown in the world of polymers. In one corner, we have…

Richie Anfinsen, B.S.April 22, 2025

Publications

Get the Most From Fiber-Reinforced Thermoplastic Composites Parts

A staple responsibility for designers at any company is to investigate ways of manufacturing their…

Erik Foltz, M.S.February 21, 2025

A color variation defect on an injection molded part.

Publications

Using Data to Pinpoint Cosmetic Defect Causes in Injection Molded Parts

Often in manufacturing it is assumed that part rejection, or low yield, is a result…

Richie Anfinsen, B.S.March 18, 2024

Publications

Material Selection of Plastics – Navigating the Process

Material selection for a product can be a complex, daunting, and intimidating process when one…

Paul Gramann, PhD, PEJanuary 2, 2024

Publications

Utilizing Fourier Transform Infrared Spectroscopy (FTIR) for Plastics Failure Analysis

Fourier transform infrared spectroscopy is one of the most commonly used analytical techniques in plastic…

Jeffrey A. JansenJanuary 2, 2024

Publications

Bringing Order to the Chaotic Debate of Turbulent Flow in Injection Molding

Metal-to-Plastic Replacement: Identifying the Ideal Polymer Candidate

Polymer Showdown — POM vs. POK — May the Best Material Win!

When Injection Molding Simulation Can Be a Great Troubleshooting Tool

Polymer Showdown — PPO vs. PA66

Polymer Showdown — PC/ABS vs. PC/PBT

Get the Most From Fiber-Reinforced Thermoplastic Composites Parts

Using Data to Pinpoint Cosmetic Defect Causes in Injection Molded Parts

Material Selection of Plastics – Navigating the Process

Utilizing Fourier Transform Infrared Spectroscopy (FTIR) for Plastics Failure Analysis

Knowledge-Base Categories

Recent Articles

Subscribe to our Newsletter

Headquarters

Resources

Knowledge-Base

Legal